Hanging a whole new ceiling fan in addition to light fixture can be as easy as rotating a wire.

1) first thing you have got to do is obtain the fuse box and shut off the electricity that goes to the light your planning to replace. Once you possess that done you do not have to bother about being knocked towards floor from jolt.

2) Next thing you have got to do is take away the old fixture. You need to check top see in the event the receptacle box will be firmly secured inside the ceiling. It needs to be level and flush with the ceiling and in a position to with stand the weight with the new fan in addition to light.

If this isn't set right you have got to secure it with a bracket set between two joist. In some cases you have got to be able to access the area above the location where the fixture is getting put. In most cases it will be easy to slide the bracket through the opening expand this and secure without going into your area above

3) If the fixture is safe pull the cables through (if not already) in addition to separate them. There should be three wires: one white (hot) one black (negative) and another green (ground). You will need to consult the instructions with the wiring connections. Depending weather or even not their is a light kit or even not the wiring takes a different approach. simple match colors with the wires as guided.

4) when that you are wiring the unit you must hang the unit in the receptacle by the hook within the unit. If there is an opening that will not be covered because of the base of the unit it may be necessary to put in a crown ring(two sixes available in most hardware stores). If this will be the case it will have to be installed before the wiring is done. It may require which the attaching screws will have to be longer. check intended for length before electrical wiring.

5) Once it has been wired and mounted you possibly can assemble the blades towards mounting hardware in addition to connect the hardware towards unit. Be sure that all blades have the same color dealing with down. Return towards fuse box and turn the ability back on. If you have wired it the right way the light and the fan should at this point work. Please read also How to Pick a Ceiling Fan Light Kit.

Guidelines & Warnings

Ensure you have all the parts you will want before starting. if your crown is essential or different screws are essential have then around.

Be sure to possess a sturdy latter and someone to work. Many a poor soul continues to be injured from slipping units. Keep all a glass items off unit until it really is installed. Make sure areas under the unit is clear of furniture and young children.